SSM100 SpeedCheck

CODE: HV-SSM100

.

 

SpeedCheck is a compact robust electronic module that incorporates two programmable outputs which are triggered via a user programmable frequency (speed) input. These outputs can be set to Normally On or Normally Off state and there is the option to set a 5% or 10% hysteresis switch off. A 2X input frequency (speed) multiplier is available in setup to trigger outputs at double the input frequency (speed). The front of the module incorporates a set/reset button and LED indication for both programming and operation functions. The SPEEDCHECK SSM100 is primarily designed for mobile plant that operates on 24VDC. 

 Applications

  • Engine OverspeedWarning
  • Road OverspeedWarning
  • 2 Stage Overspeed Warning (Operator & Modular Mining)
  • Low Idle Load Cutoff

Features

  • Single or Dual Output
  • Normally On or Normally Off Outputs
  • Programmable Setpoints
  • Adjustable Hysteresis
  • LED indication for power, inputs, outputs & setup
  • High quality Deutsch DT electrical connector (6 pin)
  • Quick and easy installation & setup
  • Single 7mm mounting hole
  • Encapsulated enclosure to resist vibration
  • Front mounted dip switches and button for programming

 

 

 

File name Filesize
SSM100 SpeedCheck Brochure 445 Kb

Type the characters you see in the picture above.

Voltage..............................................24V

Standby Current................................10mA

Operating Current (Single)................50mA

Operating Current (Dual)...................66mA

Frequency Range..............................20Hz to 20Khz

Frequency Amplitude........................1V Peak to Peak Min - 60V Peak to peak Max

Waveform..........................................AC or DC Square, Sine or Triangle

Maximum Continuous Current...........4 Amp (Relay), 200mA (Transistor)

Maximum Peak Current.....................5 Ap (Relay) 250mA (Transistor)

LED Indication...................................Yes, Power, Frequency, Output 1 & 2

Set/Reset Button...............................Yes

Dip switches......................................Yes, for Setup and Operation

Dimensions.......................................100mm x 49mm x 44mm (H,W,D includes mounting bracket)

Weight...............................................250grams

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Loading...