Level Sensor Coolant - High

CODE: HV-2013

.

 

 The HV-2013 Level Sensor is a capacitance type switch that will detect the presence or absence of coolant in a radiator. The self contained unit has a transistor switched output that will operate a relay coil or indicator lamp if required (max 1A output). The primary use of this unit is intended to switch a signal to the Montronics LevelCheck Monitor if the coolant level rises above a maximum. This sensor is configured for failsafe operation. ie: It will output while the probe is not covered with coolant, when the level rises above the sensor probe the signal will switch off.


Applications

  • Water Level indication
  • Engine coolant level indication
  • Montronics LevelCheck systems models ELA10, ELA20

Features

  • Compact size
  • Withstands harsh environments such as engine compartments
  • Degree of protection IP68
  • 1/4 NPTF connection
  • fail safe operation
  • Industry standard Deutsch DT connection
  • Max 1 Amp switching current to ground
File name Filesize
High Coolant Level Sensor Brochure 343 Kb

Type the characters you see in the picture above.

Voltage.............................................................9 to 36 VDC

Closed Circuit Consumption.............................6mA

Output Signal...................................................Transistor Low Side Switching (LSS)

Output Signal Max. Switching Current.............1 Amp (short circuit and overload protected)

Voltage Drop...................................................<300 mV

Response Delay..............................................approx 7 seconds (standard)

Degree of Protection........................................IP68 (dependant on connection)

Electrical Connection.......................................Deutsch DT 3 way (DT04-3P)

Pressure resistance.........................................25 bar (367.5 psi)

Reverse Polarity Connection...........................Yes, inbuilt

Mounting Thread.............................................1/4 NPTF

Mounting Thread Depth..................................10mm

Installation Hex size........................................27mm

Connection Cable Length...............................220mm

Dimensions Body Overall Length...................117mm

Switch Body Overall Diameter........................31mm

Probe Length..................................................39mm

Weight............................................................129 grams

 

 

 

 

 

Loading...